KRK universal printability tester
- Made by KRK (Kumagai Riki Kogyo Co., Ltd.)
- Built in 1990
- I have the complete manual.
Located in Sandersville, GA. Zip Code 31082.
Printing Area: 40mm wide x 200mm long (max.); (20mm x 30mm wide printing available with standard accessories)
Printing Pressure: Selectable in a range from 20 to 160 kg
Printing Speed: 0.5 to 8m/sec.
Printing Modes: Constant Speed mode; Accelerated Speed Mode (Three profiles available: 0-1 m/sec., 0-2 m/sec, 0-3 m/sec.
Printing Interval: 0.01 seconds to 100 hours
Temperature: Selectable in a range from approx. 17 to 30 degrees C by a digital thermostat. Incorporating a refrigerator and a 1 kW heater.
Dampener: Speeds: 0.5 to 6m/sec ( 7 speeds available: 0.5, 1,2,3,4,5,6) provided with a micro syringe and a timer.
Set-off: For the set-off test, a timing relay is provided
Electricity: 3 phase, 200V, 30A
Weight: 670 kg